Job Details

Assistant Nuclear I&C Specialist/Nuclear Journeyman I&C Specialist

Company name
FirstEnergy Corp.

Location
Oak Harbor, OH

Apply for this job






11 hit(s)  

Profile

Assistant Nuclear I&C Specialist/Nuclear Journeyman I&C Specialist

in

Oak Harbor

Ohio

Assistant Nuclear I&C Specialist/Nuclear Journeyman I&C Specialist

Location: Oak Harbor, OH, US, 43449

Job Function: Maintenance

Employee Type: Reg Full Time (FT)

Requisition ID: 3965

FirstEnergy at a Glance

FirstEnergy (NYSE: FE) is dedicated to safety, reliability and operational excellence. Headquartered in Akron, Ohio, FirstEnergy includes one of the nation’s largest investor-owned electric systems, more than 24,000 miles of transmission lines that connect the Midwest and Mid-Atlantic regions, and a diverse generating fleet with a total capacity of nearly 17,000 megawatts.

About the Opportunity

This is an open position with FirstEnergy Nuclear Operating Company, a subsidiary of FirstEnergy Corporation. [DBN]

This position reports to I&C Maintenance at the Davis-Besse Nuclear Power Station in Oak Harbor, Ohio.

Duties:

Assistant Nuclear I&C Specialist

Under close supervision, is responsible for successfully completing the training and qualification program to acquire the necessary skills and knowledge to be a useful employee. In addition, the Assistant will be assigned progressively more demanding tasks as the level of knowledge and experience increases.

Skilled work requires that the individual be qualified in the related field or be closely supervised by a Qualified Journeyman or above.

The Assistant performs any maintenance repair work assigned in all work areas involving Maintenance activities in accordance with the Station Operating License, Technical Specifications, Operating Procedures, Quality Assurance/Quality Control Procedures, and Maintenance Department procedures; performs such duties and responsibilities as:

Performing work independently in Journeyman skill areas, when qualified in accordance with the Davis-Besse Nuclear Power Station Training Program for Maintenance I&C Specialist;

Performing work in Journeyman skill areas, under the direct supervision of a qualified individual, when the individual has not yet completed qualifications;

Assisting a qualified individual in performing maintenance in Specialist skill areas;

Assisting, as assigned, in the response to any Station emergency;

Assisting in the development, correction, and validation of Station procedures and tests;

Interpreting work orders, drawings, sketches, blueprints, etc.;

Properly preparing records used in connection with the work;

Reporting abnormal conditions observed, such as: abnormal operating conditions, safety conditions, and security violations;

Using hand tools to prepare, fabricate, and otherwise repair Instrumentation & Control components structural components;

Ensuring that the work area and equipment are in good order and cleaned up after completion of work;

Following safe work practices and adhering to all Station and Company procedures for industrial and radiation safety;

Maintaining proficiency as an Assistant Nuclear I&C Specialist by meeting the established requalifications and continuing training requirements;

Completing the Nuclear Journeyman I&C Specialist qualification within four years of initial hire to Assistant Nuclear I&C Specialist;

Complying with the applicable Station Procedures in the performance of the duties; and

Performing other responsibilities, as assigned.

Nuclear Journeyman I&C Specialist

Responsible for performance of all I&C Testing and Maintenance activities, as assigned by the I&C Foreman, including inspections, calibrations, testing, repairs, rework, modifications, changing and housekeeping of all I&C equipment and components; and performs such duties as:

Performing testing and maintenance activities on I&C equipment and components, including troubleshooting and calibration and the disassembly, rework, repair, assembly, alignment, inspection and testing required to ensure the continued and reliable operation of all I&C equipment and components;

Recording and logging the results of performing I&C maintenance, testing, and calibration activities on all I&C equipment, such as as found and as left equipment and component conditions, corrective actions and settings in addition to parts, test equipment, labor and other resources such as materials used in the performance of assigned maintenance and testing activities;

Verifying that adequate and required precautions have been taken prior to initiating a maintenance or testing activity; such precautions would include tagged electrical and mechanical devices, establishment of radiation barriers and cleanliness areas, and other checks to ensure that maintenance and testing is being initiated in accordance with administrative and technical procedure requirements and promulgate safety criteria;

Providing on-the-job training in the proper use of tools, test equipment and procedures to ensure compliance with plant specific and industry accepted standards of performance, to Assistant Nuclear I&C Specialists and Journeyman who are not qualified on the maintenance or testing activities being performed;

Providing I&C support to other departments and support services, as requested, for accident mitigation and recovery efforts;

As directed, becoming the lead individual for vendor and other I&C personnel in the performance of maintenance and testing activities based on qualifications;

Reporting abnormal conditions observed or encountered; such as abnormal operating conditions, safety conditions and violations of security procedures;

Assisting in making corrections and make suggestions for the improvement of procedures, Test and Instrument Data Packages;

Performing similar or less skilled duties, as assigned; and

Performing other duties in accordance with the section of the Foreword to the Job Manual entitled Duties.

Qualifications:

Assistant Nuclear I&C Specialist

Must meet the Company's requirements as to General Qualifications and, in addition:

Prior experience is not an absolute requirement; however, prior related experience will be considered when comparing applicants;

Must be a graduate of an accredited High School or have a GED;

Must pass and stay current in training;

Must have the ability to receive, interpret and act on orders and instruction in a manner that will obtain safe and satisfactory work results;

Must be able to properly use I&C tools and precision instruments in the conduct of maintenance;

Must be able to effectively communicate both orally and in writing;

Must be capable of performing strenuous work in confined areas, where required;

Must have good manual dexterity, normal color perception and vision correctable to 20/30;

Must have a cooperative temperament and be able to work effectively with peers and management while under pressure; and

Must successfully complete, or have successfully completed, the Edison Electric Institute (EEI) POSS C/MASS Test.

Nuclear Journeyman I&C Specialist

Must meet the Company's requirements as to General Qualifications in accordance with the section of the Foreword of the Job Manual entitled, General Qualifications and, in addition:

Must have satisfactorily completed an I&C Apprentice Program or the equivalent;

Must have a working knowledge of Instrumentation and Controls and integrated operation of Nuclear Steam Supply Systems, Turbo Generators and their related auxiliary equipment; and

Must achieve and maintain qualifications in the following areas:

a. Indoctrination, or equivelant;

b. Sensors, or equivalent;

c. Analytical Instrumentation, or equivalent;

d. Process Measuring and Control (Pneumatic), or equivalent;

e. Process Measuring and Control (Electronic), or equivalent;

f. Nuclear Instrumentation; and

g. 25% of the Safety and Control Systems and 25% of the Plant Support Systems; and

Must be able to:

a. Perform calibrations, using approved procedures and Vendor Manuals;

b. Evaluate and interpret data;

c. Perform required computations and use conversion factors;

d. Interpret complex drawings, schematics and specifications

e. Properly utilize tools, and test and calibration equipment used in the maintenance;

f. Effectively communicate, using oral and written skills; and

g. Successfully complete, or have successfully completed, the Edison Electric Institute (EEI) POSS C/MASS Test.

Must possess:

a. The ability to be flexible, accountable and responsible;

b. Good manual dexterity;

c. Normal color perception;

d. Normal or corrected vision; and

e. A cooperative temperament, be able to obtain and maintain harmony and cooperation with fellow employees and others whom work must be coordinated with and effectively work under pressure.

Nearest Major Market:

Toledo

Nearest Secondary Market:

Cleveland

Job Segment:

Instrumentation, Nuclear, Electrical, Inspector, Supply, Engineering, Energy, Operations, Quality

Apply Now

Apply Now

Share

Company info

FirstEnergy Corp.
Website : https://www.firstenergycorp.com

Company Profile
FirstEnergy (NYSE: FE) is a diversified energy company dedicated to safety, reliability and operational excellence. Headquartered in Akron, Ohio, FirstEnergy includes one of the nation's largest investor-owned electric systems and a diverse generating fleet with a total capacity of more than 20,000 megawatts.

Similar Jobs:
ISU CP&A - Management Consulting Associate - Fall 2018 The candidate should have a Bachelor's degree in accounting, actuarial science, business administration, computer science, data analytics, economics, engineering, finance, fi...
JD/LLM Tax Associate, Summer 2018
location Toledo, OH
JD/LLM Tax Associate, Summer 2018 The candidate will research tax laws, rules and regulations and analyze their application to specific situations. Should have a J.D. degree preferably with 3.3 cumulative GPA. Master of Laws (LL....
Tire Lube Tech Part Time
location Toledo, OH
Description Goodyear owns and operates more than 600 tire and auto service centers nationwide. We offer a fun, fast pace work environment, with competitive base pay. Our comprehensive benefit package includes medical plans, 401...
By using Employment Crossing, I was able to find a job that I was qualified for and a place that I wanted to work at.
Madison Currin - Greenville, NC
  • All we do is research jobs.
  • Our team of researchers, programmers, and analysts find you jobs from over 1,000 career pages and other sources
  • Our members get more interviews and jobs than people who use "public job boards"
Shoot for the moon. Even if you miss it, you will land among the stars.
EmploymentCrossing - #1 Job Aggregation and Private Job-Opening Research Service — The Most Quality Jobs Anywhere
EmploymentCrossing is the first job consolidation service in the employment industry to seek to include every job that exists in the world.
Copyright © 2016 EmploymentCrossing - All rights reserved.