Job Details


Company name
Air National Guard


Belle Chasse, LA, United States

Employment Type

Bluecollar, Engineering, Military, Government

Posted on
Jan 09,2020

Valid Through
Apr 23,2020

Apply for this job



This National Guard position is for a ELECTRONICS TECHNICIAN, Position Description Number T5763000 and is part of the LA ANG 159TH FIGHTER WING, National Guard.

This position is located at an Air National Guard (ANG) Aviation Wing, Air Traffic Control (ATC) Squadron, Airfield Systems Flight.,educationRequirements:You must provide transcripts and/or other documentation as proof to support your Educational claims, and receive credit to meet the Education requirements for this position.,employmentType:FULL_TIME,hiringOrganization:Air National Guard Units,jobLocation:[{@type:Place,address:{@type:PostalAddress,addressLocality:Belle Chasse,addressRegion:LA }}],responsibilities:Duties and Responsibilities:

1. Certifies assigned systems and sub-systems to ensure compliance with USAF and Federal Aviation Administration (FAA) established standards and safety requirements. ATCALS cannot be used unless certified by the employee. These systems include (insert specific system(s) here). Installs, modifies, tests, repairs, overhauls, calibrates, maintains, evaluates, and certifies performance of complex integrated and interfacing electronic systems. Ensures systems are operating at peak efficiency with minimum interruptions by performing optimization, analysis, periodic testing, and corrective procedures. Makes overall evaluation and determination as to whether or not the facilities are operating within prescribed standards and tolerances. Required to assist in formalized inspections of facilities and equipment. Assists in flight check inspection and joint acceptance of newly installed equipment and/or major modifications to the system(s) as required. Participates in the installation, modification, and final testing of all newly installed ATCALS and weather equipment. Collaborates with FAA flight inspection personnel regarding in-flight and/or ground check tolerances and makes on-the-spot determinations as to what actions to take to return system(s) to operable condition. Provides advice to supervisor on significant issues and problems related to work accomplishment. Develops and recommends changes in procedures and technical instructions to ensure more efficient operations and/or reduction in maintenance time. Maintains inspection and certification records that are required by technical orders, applicable regulations, and operating instructions. Annotates modifications on historical reports and records. Documents maintenance and training using computerized and manual methods. Analyzes equipment historical documents and maintenance records for trends, prepares reports on trend analysis, and recommends corrective actions. Carries out supplementary assignments that improve the performance of the assigned systems. Uses sophisticated stand-alone test equipment and built-in-test-equipment (BITE) to investigate, test, calibrate, analyze, isolate, and correct malfunctions in integrated systems or subsystems. Performs installation of modifications directed by headquarters or other higher authority. Repairs or replaces components, tunes, adjusts, and aligns equipment. Component level repair may involve designing and building testing products and research for replacement or improvement of components and circuit design. If required to meet emergency situations, develops and institutes changes in procedures to expedite corrective action and ensure continuous operation where required.

2. Determines when equipment malfunctions warrant shutdown of various systems. Acts as expert technical consultant to determine whether systems are operationally acceptable and safe within the prescribed standards and tolerances for air traffic control and air navigation. Diagnoses cause of equipment degradation and malfunctions through application of electronic theory, system analysis, use of test equipment, schematics, wiring diagrams, and mathematical analysis. Troubleshoots equipment to localize, isolate, and accomplish necessary repairs. Determines when equipment malfunctions warrant shutdown of various systems. Depending on the system involved and the impact of its loss, immediately notifies controlling sources such as air traffic controllers, weather forecasters, and the military chain of command.

3. Provides technical guidance, training, and assistance to other technicians and conducts on-the-job (OJT) training to apprentices in all phases of work. Conducts and documents OJT in all phases of equipment maintenance. Certifies task qualifications and schedules task training. Performs quality control inspections, analysis of trend data, and recommends corrective actions. Coordinates with civil and military agencies on matters affecting equipment operating specifications, procurement of components and test equipment, standardizations, modification, policy, and procedures. Submits technical order improvements, modification proposals, and deficiency reports as needed.

4. Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment. Uses and assures proper fit of required safety equipment and clothing. Follows Federal and state rules when storing, using, handling, labeling, and disposing of hazardous materials and waste in accordance with environmental standards. Performs clean-up duties such as cleaning equipment, sweeping, straightening, and lining up tools and other property in the assigned area.

5. Performs other duties as assigned.,qualifications:GENERAL EXPERIENCE: Must possess experience, education or training performing simple mechanical installations and adjustments; experience which demonstrates the applicant's ability to recognize obvious malfunctions; experience using common hand tools; experience that demonstrates the ability to follow written instructions.


(FOR GS-09) - Must possess a bachelor's degree in electrical engineering, electronics engineering, or electronics technology. ~AND/OR~ Mustyou possess at least Twenty-Four (24) months of experience, education or training in installing, testing, and supporting complex electronics equipment, solving technical problems, leading small project teams and reviewing instructions for the repair, modification and maintenance equipment and related test-set equipment.

(FOR GS-11) - Must possess a bachelor's degree in electrical engineering, electronics engineering, or electronics technology. ~AND/OR~ Mustyou possess at least Thirty-Six (36) months of experience, education or training in utilizing principles, basic functions and application of theory of electronic systems or equipment. Experience in diagnosing problems and determining needed repairs for malfunctions in electronic equipment or systems. Experience in making mechanical repairs that required the use of precision measuring and calibrating equipment. Experience in using complex test equipment such as deviation meters, complex special test panels, etc. Experience which demonstrates the ability to interpret technical manuals, specifications, and publications.


1. Must be able to obtain and maintain the appropriate security clearance of the position.

2. This position is covered by the Domestic Violence Misdemeanor Amendment (30 Sep 96) of the Gun Control Act (Lautenberg Amendment) of 1968. An individual convicted of a qualifying crime of domestic violence may not perform the duties of this position.

3. Ability to establish effective professional working relationships with coworkers and customers, contributing to a cooperative working environment and successful accomplishment of the mission.

4. May occasionally be required to work other than normal duty hours; overtime may be required.

5. The duties and responsibilities of your job may significantly impact the environment. You are responsible to maintain awareness of your environmental responsibilities as dictated by legal and regulatory requirements, your organization, and its changing mission.

6. This position is designated as Essential Personnel and may be subject to duty in preparation for, or in response to, a state emergency or disaster declaration. This designation will not exceed 14 calendar days per year unless otherwise approved in advance by the TAG.

Company info

Air National Guard
Website :

Similar Jobs:
Tower Technician III
Location : Jefferson, LA
\n\nJob Description\nIf you are looking for a career in a rapidly expanding, growth oriented industry. MasTec Network Solutions has an exciting career opportunity for you! We are a telecommunications services company that offers w...
Field Technician - New Orleans, LA
Location : New Orleans, LA
Job Summary Performs varied tasks of moderate complexity requiring the application of standard procedures and criteria. Responsible for installation, decommissioning and troubleshooting problems of network equipment and circuits...
Geek Squad Our technicians are passionate electronics experts and are especially impassioned when talking about the connected car. Whether the request is to install Wi-Fi, entertainment, or a security system, you’re the type of pe...
EmploymentCrossing is great because it brings all of the jobs to one site. You don't have to go all over the place to find jobs.
Kim Bennett - Iowa,
  • All we do is research jobs.
  • Our team of researchers, programmers, and analysts find you jobs from over 1,000 career pages and other sources
  • Our members get more interviews and jobs than people who use "public job boards"
Shoot for the moon. Even if you miss it, you will land among the stars.
EmploymentCrossing - #1 Job Aggregation and Private Job-Opening Research Service — The Most Quality Jobs Anywhere
EmploymentCrossing is the first job consolidation service in the employment industry to seek to include every job that exists in the world.
Copyright © 2020 EmploymentCrossing - All rights reserved. 168 192