Zachry Brands, Inc.
La Porte, TX, United States
is currently seeking an experienced Industrial Journeyman Electrician for new construction work.
Industrial Journeyman Electricians will install, repair, and maintain electrical wiring, conduit, equipment and fixtures.
Must have 4 years experience as an Industrial Electrician Helper or above.
Must posses all Knowledge Skills and Abilities for positions (see below).
Must be able to meet all physical requirements.
Must be able to work at heights in excess of 300 ft.
Must have all required tools.
Must have reliable transportation.
Read blueprints and specification to determine the scope of work: locations, quantities, and sizes of materials required.
Identify all tools required for tasks.
Identify safety risks and the precautions required to eliminate those risks.
Cut, bend, and run conduit as specified on blue prints.
Install, modify, and fabricate cable tray as necessary according specifications.
Pull cable through specified pathways.
Assemble and install electrical equipment.
Terminate wires and cable to electrical equipment such as but not limited to breakers, control panels and distribution systems.
Test electrical components for continuity and proper voltage readings according to specifications.
Inspect electrical equipment and components to identify hazards and to ensure the equipment is in good operational condition.
Setup and maintain temporary power systems.
Install and maintain grounding systems for all equipment and structures.
Hoist equipment and tools into location via bull rigging or crane.
Preferred Additional Qualification
Current Zachry or Zachry ROF’ed employee.
Former experience working with Zachry Industrial, Inc.
Licensed Journeyman Electrician.
National Center for Construction Education and Research’s (NCCER) certification for Industrial Journeyman Electrician.
Required Knowledge, Skills and Abilities
Must be able to read blue prints and schematics proficiently to perform duties.
Must be able to demonstrate former knowledge and experience working on high voltage systems.
Must have worked as an Industrial electrical helper or as an Industrial Electrician for a minimum of 4 years.
Must know basic electrical theory for example but not limited to ohms law.
Must be able to install and modify cable tray using hand tools and power tools.
Must be able to bend and cut conduit using hand saws, hand tube bending equipment as well as power and hydraulic cutting and tube bending devices.
Must be proficient in cable pulling methods use to run cable through specified pathways.
Must be able to use specialized electrical tools such as but not limited to ohm meters, multi-meters, and terminating devices.
Must be able to terminate both High and low voltage equipment and cable/wiring.
Must be able to trouble shoot equipment and systems for electrical malfunctions.
Must be able to identify different types, gauges, and color of cables and wires.
Must be able to follow instructions correctly.
Must be reliable, accountable, and consistent in performing administrative processes.
Must be able to illustrate knowledge and experience of working with a lock out tag out system.
Must be willing and able to follow all instructed safety regulations.
Must be able to make it to work on time and work the designated schedule and any overtime as needed with the proper notification.
Employee will be required to adhere to large amounts of standing, walking, bending, squatting and lifting.
Will talk and hear to communicate.
Will use arms and hands to signal, grab, hold, turn, push, and pull: objects, materials, controls and tools.
May be required to lift, carry and move up to 50lbs.
work at heights, climb ladders and stairways, work off of platforms and man lifts, and may occasionally work out on an open structure using the appropriate fall protection requirements.
Must be able to see full range of colors. Must be able to use fingers in precise coordinated movements.
Will be required to wear personal protective equipment (PPE) including but not limited to: FRC, hard hat, safety glasses/goggles, ear plugs/muffs, masks/respirators, gloves and leather work boots.
Tool box with Lock
Tool Pouch or Tool Bucket
Set of Allen Wrenches
#1 Phillips Screwdriver
#2 Phillips Screwdriver
8” Crescent Wrench
10” Crescent wrench
420 Channel Locks
440 Channel Locks
Needle Nose Pliers
Diagonal Cutting Pliers (Dikes)
” Straight Slot Screwdriver
” Straight Slot Screwdriver
¼” Straight Slot Screwdriver
Screwdriver (screw holding type)
Hammer (Ball Peen or Claw)
½” to 1 ¼” Knockout Set
9” Side Cutting Pliers
25’ Retractable Measuring Tape
Set of 3/8” Driver and Ratchet & Socket
1 – Rain Coat
1 – Rubber boots
is dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.
Certifications and/or Licenses Required
NCCER - Industrial Electrician, Other
Other Position or Site Requirements
Must at least have an apprentice license or state electrical license
Apply to Position
VIEW JOBS ON A MAP
DROP A BUSINESS CARD
CREATE A JOB AGENT
© Copyright Zachry Group, 2015.
All rights reserved.
Zachry Brands, Inc.
Website : http://www.zachrygroup.com
Zachry Group is America's pace-setter in turnkey construction, engineering, maintenance, turnaround and fabrication services to the power, energy, chemicals, manufacturing and industrial sectors.We work with customers to plan, build and renew their most critical facilities, so they can achieve their immediate and long-term goals, all at the highest safety standards.